How to Install Remote Access Support (RAS) on your instrument? Follow

1. Things needed for installation:

• Ethernet Cable.
• Essentials-based instrument.
• Thumb drive.

Note: To start the installation, the instrument needs to be connected to a network and generate a static IP address.

2. Installation steps:

• Download the Remote Access Support Host file from the following link: https://www.dropbox.com/s/gmjri5avedhhbqb/NetopHost_Android.apk?dl=0 
• Save the file to a thumb drive. 
• Plug the USB drive into your instrument.
• On the Android system home screen, click on Essentials. 
• Once in Essentials, click on Diagnostics > Printer Drivers > Browse.

• Locate  "NetopHost_Android" file on your thumb drive, then click it.
• A black window will appear asking to install the NetOp Host. Click Yes, then Install.
• After the application is Installed click Open.

• A superuser Request window will appear asking for the users' usage permission. Select Remember choice forever. Then tap on Allow.

• Click on the first icon on the right-hand side of your screen, and then Enter the license Key sent in an e-mail by the Support Team. 

Note: If you didn't receive the license key, please contact our Support Team. 

• On the upper right side of your screen, click on Settings > Communication Profile

• Make sure that Webconnect, TCP/IP(TCP), TCP/IP (UDP) are all ON.

• Click on Webconnect and then change the URL, Account, Password, and Domain based on the information received by HunterLab Support Team.

 Note: If you didn't receive the Webconnect credentials, please contact our Support Team. 

• Click on Settings > Guest Access Security.

• Check the box Confirm Access. This feature is enabled so that each time our Support Team sends a request, message appears on your screen to “allow access.”

• Restart Netop once you are done. Go to the menu in the upper right side, and click on Restart

.

• If everything successful, a message showing “Webconnect 'hunterlabs' Online”. will appear on the Netop screen. Note: if the message does not appear, please contact our Support Team.