HunterLab capped rectangular glass transmission cells for color measurement of transparent liquids

Follow

HunterLab offers sealed top cells in all standard cell path lengths for the color measurement of transparent liquids that have volatiles; are corrosive or if spills are a problem. These capped cells are the same as our regular cells with the addition of a annealed glass top; two screw tops (one for pouring, one for air purge) with black polypropylene caps and white Teflon liners.

Part #

Description

Dimensions

Typical Sample Volume

D12-1011-893

10 mm Transmission Cell with Screw Top

10 mm path length x 55 mm wide x 57 mm high

20 ml

D12-1011-890

20 mm Transmission Cell with Screw Top

20 mm path length x 55 mm wide x 57 mm high

40 ml

D12-1011-891

33 mm Transmission Cell with Screw Top

33 mm path length x 55 mm wide x 57 mm high

70 ml

D12-1011-892

50 mm Transmission Cell with Screw Top

50 mm path length x 55 mm wide x 57 mm high

100 ml

  • The 10-mm and 20-mm cells have a 9-mm OD/5-mm ID with a Teflon-lined, hard polypropylene screw-thread top.
  • The 33-mm has a large easy-pour 22-mm OD/18-mm ID with a Teflon-lined, hard polypropylene screw-thread top.
  • The 50-mm has a large easy-pour 30-mm OD/25-mm ID with a Teflon-lined, hard polypropylene screw-thread top.

The total height of all cells plus holder is less than 90-mm so all will fit in transmission compartment of the ColorQuest XT, ColorQuest XE, UltraScan VIS and UltraScan Pro instruments using either the C02-1005-481 Transmission Cell Holder or D02-1011-568 Transmission Spill Tray and Cell Holder with the transmission door closed.

If this cell is crucial to lab operations, it is advisable to purchase 2 so that there is a backup in case of breakage.

Was this article helpful?
0 out of 0 found this helpful

Comments

Powered by Zendesk