How do I read a Standard and Sample in EasyMatch QC?

Follow

FAQ: “How do I read a Standard and Sample in the EasyMatch QC software?”

To read a standard with your instrument and the EasyMatch QC software, first place the standard at the port. Once the standard has been properly placed you have several ways you can read the standard.

  • You can go to Measurements/Read Standard in EasyMatch QC.
  • You can use the F2 hot key on the key board.
  • Or you can also use the Read Standard button on the EasyMatch QC tool bar.

To read a sample with your instrument and the EasyMatch QC software, place your sample at the port. Once the sample has been properly placed you have several ways you can read the sample.

  • You can go to Measurements/Read Sample in EasyMatch QC.
  • You can use the F3 hot key on the key board.
  • You can use the macro button on the instrument.
  • You can also use the Read Sample button on the EasyMatch QC tool bar.
Was this article helpful?
0 out of 0 found this helpful

Comments

Powered by Zendesk