Lesson 2 - Standardizing and Confirming Standardization Using the White Tile


This lesson will walk you through an example reflectance standardization for a LabScan XE.  Other instruments are standardized in slightly different fashions.  After standardization, we will confirm a reading of the white calibration tile.  Your instrument should already be attached to the computer and installed in EasyMatch QC before performing this lesson.

Note that instructions for standardization in transmittance are provided in Lesson 3.  This lesson does not apply to the ColorQuest XT.

(Download pdf file below)

Was this article helpful?
0 out of 0 found this helpful