Lesson 3 - Measuring in a Transmittance Mode

Follow

This lesson is appropriate only if you are using an instrument capable of measuring in transmittance.  If you are using a ColorQuest XE, ColorQuest XT, ColorQuest II Sphere, UltraScan XE, UltraScan PRO, or UltraScan VIS, proceed with this lesson.  If you are using a ColorFlex EZ, ColorQuest 45/0 LAV, LabScan XE, or MiniScan EZ, do not attempt this lesson. 

Your instrument should already be attached to the computer and installed in EasyMatch QC before performing this lesson.

Was this article helpful?
0 out of 0 found this helpful

Comments

Powered by Zendesk