How do I Connect my Agera and Computer through a Network? Follow
Method #3
You can connect Agera to a network hub using the Ethernet cable or connect Agera to a network hotspot through a WiFi connection. The computer must be connected to the same network as the Agera.
Option A: Connect Agera to the network with Ethernet cable.
- To connect Agera to network, go to WORKSPACES PREFERENCES > CONFIG NETWORK SETTINGS. Select Ethernet configuration and check Use DHCP for Ethernet Config. Please write down the IP address showing in the Ethernet Setting dialog. You can also check the IP address of Agera in JOBS > ABOUT > INFO.
- Go back to WORKSPACES > PREFERENCES and select AUTO NETWORK DATA EXPORT using a check and select CONFIG button. Choose Agera as SERVER and PORT NUMBER as 11111 (Note: You can use 10001 as well, as long as the number is same in Client and Server). You can also choose a delimiter to mark your data.
- Configure the terminal program such as Hyperterminal in the computer with the following settings:
- Set computer as CLIENT.
- Enter the IP address of Agera which is recorded in step 1 above.
- Put the port number as “11111". (You can use 10001 as well, as long as the number is same in Client and Server). After all the setting, you should be ready to get the data exported from Agera to the computer.
Option B: Connect to a hotspot through the WiFi connection
- To connect Agera to network, go to WORKSPACES> PREFERENCES and select CONFIG NETWORK SETTINGS. Select CONFIGURE WIFI SETTINGS and the WiFi configuration dialog will be prompted. Please search and connect to the available WiFi and write down the IP address showing in this dialog. After the WiFi configuration, please click the floating BACK BUTTON to go back to Essentials app.
- Go back to WORKSPACES > PREFERENCES and select AUTO NETWORK DATA EXPORT Measurement using a check and select CONFIG button. Choose Agera as SERVER and PORT NUMBER as 11111. (Note: You can use 10001 as well, as long as the number is same in Client and Server). You can also choose a delimiter to mark your data.
- Configure the terminal program such as HYPERTERMINAL in the computer with the following settings:
- Set computer as client.
- Enter the IP address of Agera which is recorded in step 1 above.
- Put the port number as “11111” (You can use 10001 as well, as long as the number is same in Client and Server.)
- After all the setting, you should be ready to get the data exported from Agera to the computer.
Do you still need more information? Submit a ticket and our support team member will reach out to you soon!
Comments
0 comments
Please sign in to leave a comment.