FAQ: Can I manually enter L*, a*, b* values into EasyMatch QC?
Answer:
If you have a specific set of L* a* b* values, you can manually enter them into EasyMatch QC. To do this make sure nothing is selected in the job tree (the left column of the EasyMatch QC software where samples and standards are listed.) Then right click in the job tree and select either Enter Standard Data or Enter Sample Data.
In this new window specify whether to enter colorimetric or spectral values. You can also need to choose the illuminant and observer and the color scale. Once these parameters are set you can enter your values into the appropriate value box.
Click OK and then you will be prompted to enter a Standard or Sample ID.
FAQ: Can I manually enter Yellowness or Whiteness Index values in EasyMatch QC?
Answer:
Not directly, but if you enter any 3-number color scale, single number metrics such as WI or YI can be derived and automatically displayed.
Note: If the YI or WI metric is defined for C/2° or D65/10°, you must enter the X, Y, Z or L*, a*, b* values for that illuminant/observer combination or it will not display.
Three (3) number colorimetric L*, a*, b* values were manually entered for C/2 conditions. This hand entry will not display as a spectral plot or for other illuminant/observer conditions. The derivative Yellowness Index or Whiteness Index will only display for C/2.
If you want to display colorimetric or specialized YI and WI values for all illuminant/observer combinations, manually enter the spectral data for the material.
If you hand enter or copy/paste spectral data for the full spectral range, EasyMatch QC will display spectral data and plot, colorimetric data and special indices for all illuminant/observer conditions.
Do you still need more information? Submit a ticket and our support team member will reach out to you soon!