Purpose: Provides descriptions and Part #s for MiniScan EZ 45/0 LAV with various glass, polycarbonate, UV cut-off filters and no filter as part of the redesigned port assembly.

Important Notes:

D02-1014-367 45/0 Large Area of View (LAV) Nose Cone with Screw-On Glass Port, Used on: MiniScan EZ 45/0 LAV, MiniScan XP 45/0 LAV

Provides a user-installable, modified nose cone base with a replaceable A02-1014-374 screw-on end cap with glass port. This port is designed to protect the instrument from dust, fluff and moisture. Also includes a replaceable A02-1014-435 screw-on end cap with a 32mm open port to run instrument diagnostics. This modified nose cone can be installed on MiniScan EZ/MSXP/MiniScan XE 45/0 LAV sensors.

Note: D02-1014-367 MiniScan EZ Nose Cone has a better screw on design but same functionality as A02-1002-129 MiniScan XE 45L Nose Cone with Lower Glass Assembly and can replace it on MSXE and MSXP 45/0 LAV models with measurement agreement expected.

A02-1014-374 MiniScan EZ 45/0 LAV Replacement Screw-On Glass End Cap

Replacement screw-on end cap with glass port for D02-1014-367 MiniScan EZ Nose Cone that can be user-installed in the field.

D02-1014-427 MiniScan EZ 45/0 LAV Nose Cone with Screw-On Polycarbonate Port

Provides a user-installable, modified nose cone base with a replaceable A02-1014-428 screw-on end cap with polycarbonate port. This port is designed to protect the instrument from dust, fluff and moisture, and where glass cannot be used. Also includes a replaceable A02-1014-435 screw-on end cap with a 32mm open port to run instrument diagnostics. This modified nose cone can be installed on MiniScan EZ 4500L/MiniScan XP 4500L/MiniScan XE 4500L sensors.

Note: D02-1014-427 MiniScan EZ Nose Cone has a better screw on design but same functionality as B02-1009-550 MiniScan XE 45/0 Nose Cone with Lower Polycarbonate Assembly and can replace it on MiniScan XE and MiniScan XP 45/0 LAV models with measurement agreement expected.

A02-1014-428 MiniScan EZ 45/0 LAV Replacement Screw-On Polycarbonate End Cap

Replacement screw-on end cap with polycarbonate port for D02-1014-427 MiniScan EZ Nose Cone that can be user-installed in the field.

D02-1014-436 MiniScan EZ 45/0 LAV Nose Cone with Screw-On 420-nm UV Filter Port

Provides a user-installable, modified nose cone base with a replaceable A02-1014-437 screw-on end cap with 420-nm UV Filter in the port. This UV cut-off filter eliminates the effects of UV optical brightening with paper, plastics and textiles, allowing the base color to be measured. Also includes a replaceable A02-1014-435 screw-on end cap with a 32mm open port to run instrument diagnostics. This modified nose cone can be installed on MiniScan EZ/MiniScan XP/MiniScan XE 45/0 LAV sensors.

Note: D02-1014-436 MiniScan EZ Nose Cone has a better screw on design but same functionality as MiniScan XE 45/0 LAV Nose Cone Lower 420nm UV Filter Assembly and can replace it on MiniScan XE and MiniScan XP 45/0 LAV models with measurement agreement expected.

A02-1014-437 MiniScan EZ 45/0 LAV Replacement Screw-On 420-nm UV Filter End Cap

Replacement screw-on end cap with 420-nm UV Filter port for D02-1014-436 MiniScan EZ Nose Cone that can be user-installed in the field.

D02-1014-416 MiniScan EZ 45/0 LAV Nose Cone with Screw-On Wet Sample Port

Provides a user-installable, modified nose cone base with a replaceable A02-1014-431 screw-on wet sample end cap. This port is intended for measuring wet coatings spread on glass or card stock.

Note: D02-1014-416 MiniScan EZ Nose Cone is slightly different design from the D02-1009-935 MiniScan XE 45/0 Wet Sample Holder Assembly but can replace it on MiniScan XE and MiniScan XP 45/0 LAV models. (Measurement agreement statement?)

A02-1014-431 MiniScan EZ 45/0 LAV Replacement Screw-On Wet Sample End Cap

Replacement screw-on end cap with wet sample port for D02-1014-416 MiniScan EZ Nose Cone that can be user-installed in the field.